Vlan manual nvram mac

cisco svi autostate
cisco 9300 no autostatevlan mac address
cisco vlan interface down
cisco vlan down interface up
how to bring vlan interface up
cisco force vlan up
the active vlan interface is not up the arp process ignores the frame

An entry for the destination MAC address mac - addr ( use dashed format on COS permanent ( entries are stored in NVRAM and preserved across switchIn VTP server mode, VLAN configurations are saved in NVRAM on the switch. Client In client mode, switches receive information from VTP servers, shutdown - Physical, VLAN, port-channel Interface manual - Manual mode. The default IP address shown in the output of show nvram is retrieved as Cisco Catalyst 2960 Manual Online: Debug Nvram. debug nvram Use the debug nvram privileged EXEC command to enable debugging of NVRAM activity. In VTP server mode, VLAN configurations are saved in NVRAM on the switch. Client In client mode, switches receive information from VTP servers, Insert a loopback into an unused interface; configure the interface as a switchport with the appropriate VLAN(s); apply a MAC ACL to drop all frames Command Line Reference Guide for the S5048F–ON System 9.14.2.6 | nvram-erase. Common MAC Access List Commands GARP VLAN Registration (GVRP). MAC-based VLAN Command List. This manual provides a reference for all of the commands contained in the CLI. NVRAM and then reboot the system.