Variador danfoss manual

1.1 Purpose of the Manual 3 1.2 Additional Resources 3 1.3 Document and Software Version 3 1.4 Intended Use 3 1.5 Block Diagram of the Frequency Converter 4 1.6 Enclosure Types and Power Ratings 4 1.7 Approvals and Certifications 4 1.8 Disposal Instruction 4 2 Safety 5 2.1 Safety Symbols 5 2.2 Qualified Personnel 5 2.3 Safety Precautions 5 3 VLT® 2800 Series IntroductiontoVLT 2800 195NA009.17 VLT 2800 Series Instruction Manual Software version: 2.8x This Instruction Manual can be used for all VLT 2800 Series adjustable frequency drives (AFD) with software version 2.8x. The software version number can be seen from parameter 640 Software Version. MG.28.D5.02 - VLT is a registered Danfoss trademark 195R0033 The manual gives a description of the different faults. No. 2 Live zero fault VLT 2800 Quick Reference Guide. 195R0033 Parameter- Selection/range Factory Setting activos de Danfoss pueden funcionar a un nivel de tension medio a traves de un transformador reductor. VLT® Advanced Harmonic Filter AHF 005/010 Los fi ltros armonicos avanzados de Danfoss han sido espe-cialmente disenados para adaptarse a los convertidores de frecuencia de Danfoss. La solucion, disponible en dos varian- VLT® 8000 AQUA Compact IP 54/NEMA 12 VLT 8022 - 8032 200 - 240 V VLT 8042 - 8072 380 - 480 V 58 MG.80.A2.02 - VLT is a registered Danfoss trademark VLT® 5000 PROFIBUS MG.10.E4.02 - VLT is a registered Danfoss trademark 3 About this manual This manual is intended as both an instruction ma-nual and a reference guide. It only broaches the basics of the PROFIBUS DP protocol, and only when it is necessary to provide a sufficient under-standing of the PROFIDRIVE implementation of Danfoss recommends using the fuses mentioned in the following tables to protect service personnel or other equipment in case of an internal failure in the unit or short-circuit on DC-link. The frequency converter prov ides full short circuit protection in case of a short-circuit on the motor or brake outpu