Rfid card access control operating manual

rfid access control wiring diagram
k2000 rfid access control manual pdf
manual access control system
entry pass door access system manual
youhe yh2000-c rfid access control user manualrfid access control manual pdf
rfid access control manual reset
rfid access control programming

When door is locked TT seconds,if the door contact sensor is in alarm status,the controller is in alarm mode.This function should be used when the door sensor (Please read operating maual carefully before use) please keep the operating manual carefully. RFID Card Access Control. Operating Manual. 2）If there is no programming instruction within 20 seconds, system will automatically quit programming mode and enter the normal working mode. 3）Successfully RFID Access Control Panel. Manual. HCRFID0002. Product Specification. Voltage: 12VDC+10%, Current 1.2A. Lock Relay: 12VDC/2A. Wiring instruction. Enter Program mode. Function setup. The exit key. The doorbell key. Modify card password. Restore to factory default setting.Please read the operation steps before installation. 1. Introduction: This series of RFID card access control is working with card only, password only, Card RFID CardAccess Control Keypad Manual. Please read manual carefully before installation and keep the manual carefully forever. 1. Technical Parameters:.