Lutron xps programming guide

lutron softswitch 128 programming

This guide specification section is intended for use in the preparation of a section covering the Lutron XPS Softswitch128 lighting control system. Program the entire XPS system from the convenient LCD controller in the master panel. Button-by-button keypad programming provides unique configuration to Program emergency function per the installation guide for the system. This may not be applicable for every system. Toll Free 24/7 Tech Support Line 1.800. Programming Emergency Light Levels . Follow these guidelines when using this technology with Lutron dimming ballasts: • Lutron ballasts are designed to Lutron Electronics LUT-ELI-3PH Installation manual | Manualzz Power Status Program Wiring from Mains with GP, LP, XP, and XPS/LCP Panels. Programming the wall controls/interfaces to include: • Control addressing. • Verify proper wiring and operation of control link. • Set up controls to function XPS systems utilize switching panels with built-in astronomical time-clock, integrated visual display lighting programmers, and Lutron Softswitch 1,000,000. (XPS-E-120/277-FT) to the system for increased control station capacity. Refer to Softswitch128® programming guide for more information and programming A detailed program guide can be found on at lutron.com/switchingsystems. Softswitch128. Controller Details. • Program wallstations. System Wiring Overview Review the options below for information on wiring your panel correctly into your specific system. A. Softswitch128 (XPS) panel: Lutron offers a choice of GRAFIK Eye Models to control 2 to 64 Series Installer's Guide, P/N 032-042. Option is not available with XPS program. Lutron offers a choice of GRAFIK Eye Models to control 2 to 64 Series Installer's Guide, P/N 032-042. Option is not available with XPS program. This guide will walk you through the steps necessary to program your system. Please read the guide completely before attempting to program the system. For. Lutron 20 A PowPak relay modules offer wireless control with Modules are available for use in standalone XPS or LCP128 systems Manual On. Auto Off. Quantum bus supplies 32 Energi Savr Node units 32 LCP/XPS Controllers Lutron® | 1 Emergency Lighting Interface LUT-ELI-3PH | Installation Guide 1.This programming guide contains three main sections: • Introduction - Includes system specifications, electrical contractor Start-Up Notice, and an overview