Labquest 2 manual

Step 1 - Charge the LabQuest 2 Before updating it is important to make sure that your LabQuest 2 is charged. Preferably charge your LabQuest overnight, if that is not possible make sure that it has been charged for at least 4 hours before applying an update. We find that most update problems occur when the LabQuest has a poorly charged battery. If you've never used the Vernier Labquest 2- you will want to check this out and try the simple approach to getting probeware used in the classroom. Contents hide 1 User Manual 1.1 Go Direct Static Charge 2 What's Included 3 Compatible Software 4 Getting Started 5 Specifications 6 Care and Maintenance 7 Warranty 8 IC Statement 9 Read More About This Manual & Download PDF: 9.1 Questions about your Manual? Post in the comments! 9.2 Related Manuals / Resources User Manual … Continue reading "Go Direct Static Charge User Manual" Sci-Voice Talking Labquest2 Version 2.3 Brochure (PDF) Includes: -Sci-Voice TM Talking LabQuest2 version 2.3 -Stainless steel temperature probe -Differential voltage sensor -Current Sensor -USB keyboard -For a limited time, LabQuest Viewer will be included with LabQuest 2 version 2.3 upgrades (link to Vernier Page) Product Manual 2. Connect the small end of the USB cable to the USB port on the end of LabQuest Mini. 3. Connect the other end of the cable to a USB port on your computer. 4. Start Logger Lite, and you are ready to collect data. Note: LabQuest Mini can also be used with Logger Pro ® software, version 3.8.2 or newer. LabQuest Mini Components LabQuest 2, LabQuest 3, LabQuest Stream Click or tap Manual Entry to initiate an experiment in which you manually enter data into a data table. You can use Graphical Analysis to analyze non-sensor data that you collect, find in a textbook, or find on the internet. Choose the Manual option. 11.Tap on the IP Address and change it to 192.168.1.1 12. Tap OK to return to the main network setup screen. iOS Network Settings 1. Make sure the LabQuest 2 is on and Wi-Fi is still on. 2. On your iOS device, open the Settings app. 3. Tap on Wi-Fi in the left sidebar. A list of available networks will appear. 4. The LabQuest 2 software is the heart of the LabQuest 2. To perform any lab, the sensors must be connected to the one of the channels or digital ports. When collecting data, there are three views, each with it's own function and capabilities. Adding a New Manual Column: If your data needs to be measured with respect to another variable 3 User Manual iv IC Statement This device complies with Industry Canada license- exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.