Kn filter installation instructions

k&n air filter design & installation Clarion Builds BMW 2002 Custom K&N Air Filter Design and Installation Written by Jeremy Templeman, Brand News Writer / Reporter at K&N Engineering, Inc. When Clarion Builds delivered the 1974 BMW 2002 to K&N Air Filters headquarters in Riverside, California the 'O2 lacked air filtration.

There are special installation instructions, so please follow the procedures outlined below to ensure the K&N® air filter seals properly. K&N Engineering, Inc., suggests checking the air filter element periodically for excessive dirt build-up. Depending on your driving conditions, we recommend cleaning your air filter every 50,000 miles. K&N® intake tube and secure with the provided hardware. NOTE: Be sure to install the mass air sensor in the correct direction, the opening is to be. towards the filter end of the tube. 22. Install the K&N ® intake tube assembly into the silicone hose at the filter adapter and then into the silicone hose on the throttle body and secure with A filter cleaned with K&N cleaning products will ensure a lifetime of performance from your air filter. Instructions for cleaning your K&N air filter are on our Air Filter Cleaning Instructions page. Steps. Reverse the 4 screws holding the air box cover in place and remove the air filter. Apply the cleaner. Spray K&N Air Filter Cleaner onto at the filter adapter and then into the hose at the throttle body, adjust the tube for best fit and then secure with the provided hose clamps. 16. Connect the factory EVAP and Crank case vent lines to the fittings on the K&N ® There are special installation instructions, so please follow the procedures outlined below to ensure the K&N® air filter seals properly. K&N Engineering, Inc., suggests checking the air filter element periodically for excessive dirt build-up. Depending on your driving conditions, we recommend cleaning your air filter every 50,000 miles. 4. Slid