Ioptron cube manual

It is highly recommended that you read the entire manual and become familiar with the nomenclature and function of all components before starting the assembly. STEP 1. Setup Tripod Expand the tripod legs. Put the Accessory Tray onto the Tripod Support Bracket. User Manuals: User Reviews: Software/Firmware Updates 8401 Hand Controller Star Catalog: CEM60 Mount: iEQ Pro Mount: iOptron ASCOM Driver: Cube/CubePro: Knowledge Base: Astronomy Clubs: Astronomy 101 Support >> Telescopes & Mounts . IOPTRON TELESCOPE, MOUNT, AND CONTROLLER WARRANTY . A. iOptron warrants your telescope, mount, or The Cube™. This compact mount design is one of the most functional and flexible units on the market. Sky & Telescopemagazine named it "Hot Product 2008". Both axis motors are built into a small single unit with optical encoders that provide accurate GOTO and tracking. Spread the tripod, plunk the 'Cube' on top, thread the center hold down bolt up through the base, and install the spreader on the lower half of the bolt, plug in the controller and you're done. It can be done in under 2 minutes. The whole setup can be easily carried outdoors in one piece without any heavy breathing. Review of the iOptron SmartStar A "Cube" Mount February, 2012 By Brian D. Ottum, Ph.D. Michigan Figure 1. The third thing that struck me is the total lack of an owner's manual. There's just a quick start guide that only hits the high points (and is fraught with misspellings and poor grammar). Luckily, I had already searched and iOptron StarFi Manual iOptron StarFi provides the Wi-Fi connection capability to the following iOptron telescope iOptron iEQ45/30 w/8407 HC iOptron iEQ45 w/8406 HC iOptron CEM25/CEM25EC iOptron ZEQ25 iOptron Cube II/CubePro w/8408 HC iOptron SmartEQ Pro+ iOptron SmartEQ/SmartEQ Pro 1. Hardware connection: Step 1. Power the StarFi Adapter View and Download iOptron 8604 instruction manual online. Keep to these simple guidelines to get SmartStar CubePro Instruction Manual - IOptron prepared for submitting: Get the sample you need in our collection of templates. Open the document in the online editor. Read the instructions to discover which data you need to include. Click the fillable fields and include the required details. ONLINE CONTENTS (click under "Support" menu button) iOptron.com • Full manual (you can refer to the full manual for more details on set-up and operation). • Tips for operating • Reviews and feedback from other customers • Accessories information (including AC adapter, carry bag, and more) Assembly Terms 1. Telescope tube 2. To Control an iOptron iEQ Mount. iOptron's iEQ mount, such as iEQ45 and iEQ75, can be connected to a computer using supplied RS232 cable, if your PC equipped with a serial port (COM1). A USB to COM adapter is needed if your computer does not have a serial port, like most of the laptops today. Follow the adapter instruction for detailed only search iOptron. User Manuals: User Reviews: Software/Firmware Updates: Obsoletes: SmartStar PR and GOTONOVA Kit 8401 Hand Controller Manual | GoToNova 8401 #8401, #8402, #8403 Hand SmartStar Cube-E Series | Full Version | Quick Start Guide #8506 Please refer to the full manual at iOptron.com for details. Step 1. Extend tripod legs to full extension. Step 2. Attach mount to tripod using the long bolt (#7). Slide tray on bottom of shaft. Then screw on round black knob (#9). Step 3. Attach telescope to mount using dovetail lock (#2). Step 4. Set telescope to PARK POSITION. Please refer to