Imo pump manual

Head curve pump motor specifications pumps mp less imo pump manual. IMO Fire Control Symbols [Resolution A654(16)]. 11 Pics about IMO Fire Control Symbols [Resolution A654(16)] : IMO AB Screw Pumps, IMO 1-1/2" X 1" PUMP C3EBC 118P and also smog pump removal. - Third Generation F-Body Message Boards. 2 imo.se ACF/UCF5 2018.01 en-GB, ID-No.: 163-44/ ATTENTION ATTENTION Safety The manufacturer accepts no liability for damages caused by disregarding any of the documentation. Intended use • Only use the pump to pump the agreed pumped liquids (→ order data sheet). • Adhere to the operating limits. • Avoid dry running: When corresponding with Imo Pump regarding Series G12D-187, 218, 250, 275 and 312 series pumps, refer to pump nameplate, this instruction manual, and assembly drawing as instructed below: 1. From pump nameplate, record pump model number, serial number, and manufactured date. 2. Record instruction manual number, revision, and date. 3. Imo Pump - Parts Search Parts Search Page Use this page to search by pump model number or bill of material number for parts lists for these products: 3-screw and gear pumps major and minor repair kits older, obsolete pumps still supported with kits or parts Enter a pump model number or bill of material number in the text box. Then click Search. The pump is designed to be connected to an electrical motor via a flexible shaft coupling. Speed The maximum speed is 3600 rpm. For higher speeds, contact IMO AB. Rotation The pump is designed to operate in one rotational direction only, as standard clockwise when facing the shaft end. Pumps for CCW operation can be delivered on special request. For IMO-pump ACE 032N2 NTBP, serial number 456760: Shaft seal pos G050 p/n 190811 Valve spring pos 615 p/n 154054 Old designation: Replaced by gen 1: Replaced by gen 2: Current designation: ACE 25-2 NC ACE 025N1 IRBP ACE 025N2 NVBP ACE 025N3 NVBP ACE 25-2L NC 615A ACE 025L1 IRBO ACE 025L2 NVBO ACE 025L3 NVBP World leader in Positive Displacement PD pumps for lube and fuel handling systems including booster and sealless magnetic coupled pumps. HOME | COMPANY | CAREERS (March 2022) Upgrading of old low pressure IMO Pumps (March 2022) Obsolete IMO-products and their withdrawal year (March 2022) Performance data & Dimension prints for obsolete 2 imo.se D4 2019.12 en-GB, ID-No.: 163-047/B ATTENTION ATTENTION Safety The manufacturer accepts no liability for damages caused by disregarding any of the documentation. Intended use • Only use the pump to pump the agreed pumped liquids (→ order data sheet). • Adhere to the operating limits. • Avoid dry running: IMO PUMP 3G SERIES 3G118 with axial inlet The 3G series pump is intended for use in lubrication, hydraulic and control oil services such as those found on rotating machinery or other equipment needing forced lubrication, circulation or fluid transfer. This series is available in seventeen displacements fitted into five casing sizes. IMO Pump ACF. IMO ACF pumps are low-pressure screw pompe which can operating with heating oils, lubricating oils, fuel oils and other fluids. Technical data: • range of capacity 6,66 - 50,9 dm3/s, • max temperature of liquid 363 K (90*C), • range of liquid's viscosity 2 - 3800 mm2/s, • nominal pressure for liquid of 75mm2/s Inlet strainers are required to keep contaminents and abrasives out of the pump. They must be selected in consultation with the strainer vendor to prevent pump starvation. Normally, 60 mesh (0.01 inch - 238 micron) for light and 1/8 - 3/16 i