Hunter battery timer manual

Residential irrigation controller, Owner's manual and programming instructions • Read online or download PDF • Hunter X-CORE User Manual The SVC-400 is capable of operating up to four individual DC latching solenoids. Hunter DC solenoids (P/N 458200) can easily be installed on all Hunter Plastic Valves. Sole-noids must be ordered separately. NOTE: Must use DC Latching Solenoids. 24VAC Solenoids will not operate with the SVC-400. To Wire DC Solenoids to the SVC: 1. The Texas Hunter Timer measures the battery voltage and displays a reading of Good, Fair, or Poor. Q: What is the purpose of the receptacle on the bottom of the Texas Hunter Timer? A: This receptacle is used by Texas Hunter on the new 2014 EZ Set Timers to run diagnostics and is also used to install any programming updates. Activating the Battery After installing your X-Core, make sure to remove the battery contact insulator to allow the X-Core to keep time in the event of a power outage. CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS. The American Hunter 225 lb Capacity Tripod Feeder with RDE Digital Timer features a programmable digital timer and weather-resistant housing. The TBOS-II battery-operated line of buriable irrigation controllers allows the use of automatic irrigation in challenging areas where AC power is not available. Its water saving programming features maximize water efficiency by letting you build highly-customized programs. With seven advanced programming features, the TBOS-II™ cuts setup time and eliminates repeat trips to the controller Battery Operated, Fixed. RELIABLE BATTERY-POWERED CONTROL WITHOUT THE NEED OF AN ELECTRICAL CONNECTION. For isolated sites, power-restricted areas, or the special needs of drip zones, the Hunter Node is the smart, reliable solution. The Node mounts to a valve's solenoid quickly and easily, and without screws, drills or additional wires. Hunter Sprinkler N