Harley drive belt replacement instructions !169!

Replaces 04. Harley davidson emergency drive belt replacement kits for temporary replacement of secondary belt. This is a brand new harley davidson oem original equipment manufacturer emergency rear drive belt repair kit. Contains spliced belt, alignment fixture block, hardware, allen wrenches, and instructions. D.F.T. TRIKE CONVERSION INSTALLATION INSTRUCTIONS FOR HARLEY'S m, STEP 1: Remove swing arm and fender assemblies. Replace spool w/pulley installed on left suspension main casting assembly. Adjust belt tension and Bob LaRosa walks us through the last few steps before the whole drive needs to go back on. The drive shaft seal spacer goes on with a JIMS specialty tool. Once that is in place the Harley pulley goes on. There is some work that still needs to be done before get on the road. KNIGHT PROWLER BELT DRIVE® INSTALLATION INSTRUCTIONS Using Harley-Davidson service manual proc shoe. 1 Replace with new Harley-Davidson pump if necessary. Install 'O' ring in case cavity. Install cam support plate assembly and If the drive belt is damaged or broken, the bike will not run properly. Replacing the drive belt yourself can save considerable time and money. With the correct tools and knowledge, almost any Harley owner can replace the drive belt in around two hours. You can buy the tools and replacement belt at any Harley dealership. Instructions. 1. Re: new belt drive installation Post by Hog54 » Sun Mar 18, 2012 5:00 pm I dont remember ever having to elongate the plate holes on any bike to put a belt drive on and I have installed quite a few of them.If you can,show a picture of what you got there. Drive Belt Replacement On A Harley Davidson Touring Model Scott broke the process up into several videos and placed them in the above playlist. You can find a tool and supply list along with detailed instructions over on his blog, Ride It Wrench It . how hard is it to install a rear drive belt on a 1999 flht and do you have to pull the inner primary Here are