Electrical drives lab manual pdf

Control of Electrical Drives. Laboratory exercise 1 2 1. Introduction In this lab a current controller for a DC machine and a speed control for the electric drive system will be studied. The control system is a Simulink block diagram-based model that will be implemented in the dSpace real-time hardware. This Laboratory Manual for DC Electrical Circuits, by James M. Fiore is copyrighted under the terms of a Creative Commons license: This work is freely redistributable for non-commercial use, share-alike with attribution Published by James M. Fiore via dissidents Electric Drives Experiment 1 Familiarization and Systems Check of the Electric Drives Lab The instructor or TA will inform you how many students should work together at one lab station. 1.1 Objective The objective of this experiment is to introduce students to the electric drives lab and to verify electrical symbols as listed in the EE 11 Manual should be used. A neat pencil diagram will be acceptable, if suitable for photocopying. 5. Data Sheets (a) The observed laboratory data should be placed at the end of the report. The original laboratory data should be taken in ink or ball point pen and should have no erasures. All information At the end of each laboratory session you must obtain the signature of the teacher along with the marks for the session out of 10 on the lab notebook. Lab Reports Note that, although students are encouraged to collaborate during lab, each must individually prepare a report and submit. They must be organized, neat and legible. Electrical Technology Lab SEM -1ST EXPERIMENT NO.1 AIM-To Verify KCL.APPARATUS REQUIRED-Network Theorem kit, Connecting Wires, Power Supply(220,50HZ). THEORY-It States that the algebraic sum of currents meeting at a junction is zero.In other words, the sum of the currents flowing away from a junction is equal to the sum of current