Dell s4048-on manual

Dell S4048 Manual Online: install the hardware, Install The Chassis. Before Installing The Switch, Verify That You Meet These Guidelines: • You Have Enough Clearance To The Front Of The Switch So You Can Read The Light Emitting Diodes (Leds). • The Ac Power Cord Reaches From The Power Dell S4048 Manual Online: default configuration, Configuring Layer 2 (Data Link) Mode. When You Install The Dell Networking Os Onto Your S4048-On System, It Is Not Configured When You Power Up For The First Time (Except For The Default Host Name, Which Is Dell). You Must Configure The fileslib. 6 Dell EMC Networking S4148-ON and S4128-ON Switch Configuration Guide for Dell EMC SC Series SANs | SCG3704 Note: The latest firmware updates and documentation can be found at Dell.com/support. 1.4 Cabling diagram The cabling diagram shown in Figure 1 represents the Dell EMC recommended method for deploying servers and SC Series arrays.