Danfoss pressure switch kp35 manual pdf

Learn how to set up a Danfoss pressure switch. On most Danfoss pressure switches, the differential is adjustable. As a higher differential results in fewer s filexlib. Danfoss KP 35 Pressure switches are used for regulating, monitoring and alarm systems in industry. KP pressure switches are recommended for gaseous media (also water, but only when mounted directly on the pipe - do not use capillary tube mounting. Danfoss KP 35 Pressure switches are fitted with a singlepole switch changeover (SPDT). Safety pressure switches with EN 12263 approval and CE marked acc. PED (Pressure Equipment Directive) *) R22, R134a, R404A, R407A, R407C, R407F, R422B, R422D, R507A, R717 **) For complete list of approved refrigerants, visit products.danfoss.com and search for individual code numbers, where refrigerants
A differential pressure switch compares two pressures and acts on the difference. When the set differential pressure is exceeded, the contact system activate
assets.danfoss.com
TME
Danfoss dual pressure switch type KP 44 is designed for use as a pump guard to control and protect supply water pumps. It combines the functions of a pressure switch and a flow monitoring device. The lefthand pressure bellows control the pump pressure. The righthand bellows cut out the pump if the suction pressure is too low. Instructions 060R9309 060R9309 Pressure Controls KP 35, KP 36 and KP 37 KP 35, KP 36, KP 37 t1 min. -40 0C t1 max. 650C t2 min. -40 0C t2 max. 1000C Ptestmax. KP 35: 22 bar KP 36: 22 bar KP 37: 32 bar No maintenance is required for the controls after final installation Please note: scale in KP units is indicative only.
Danfoss KP35 Pressure Switch is a device for regulating, monitoring, and alarm systems in industrial applications. This Danfoss Pressure Switch is suitable for gaseous media & air. The pressure Switch is fixed with a single-pole switch changeover (SPDT), & can control single-phase ac motors of up to 2 kW directly.
Dimensions [in]KP 35, KP 36 and KP 37 KP 34 Approximate weight: 0.83 lb Approximate weight: 0.9 lb Design and functionKey sketch of KP pressure switch front cover and scale. Version with manual reset 1. Range setting spindle 2. 3. Main arm 4. Main spring 5. 6. Bellows 7. Pressure connector 8. Contact system 9. Switch terminals 10.
Pressure switches, type KP Technical leafl et INDUSTRIAL AUTOMATION IC.PD.P10.N1.02 - 520B3110 Danfoss KP pressure switches are used for regulating, monitoring and alarm systems in industry. KP pressure switches are recommended for gaseous media (also water, but only when mounted directly on the pipe - do not use capillary tube mounting).

Danfoss pressure switch kp35 pdf podrecznik
Danfoss pressure switch kp35 pdf handboek
Danfoss pressure switch kp35 pdf service guide
Danfoss pressure switch kp35 pdf handbuch
Danfoss pressure switch kp35 pdf lamhleabhar