Corian fabrication manual

of DuPont TM Corian® Surfaces Products. It is important to note that the techniques listed have been designed to optimize the performance of DuPont TM Corian® in line with its chemical formulation and exclusive performance properties. It is impossible to cover all fabrication techniques in this manual. Fabrication Manual by Chapter. Chapter 1 - Safety Recommendations. Chapter 2 - Tools and Accessories. Chapter 3 - Safe Handling & Storage. Chapter 4 - Quality Inspection. Chapter 5 - Site Preparation & Templating. Chapter 6 - Positioning of Seams. Chapter 7 - Cutting & Cutouts. Refer to the DuPont™ Corian® Fabrication Manual for details on fabrication techniques referenced in this document. The increased translucency and use of backlighting allows the use of this material in new and unique applications requiring advanced fabrication and lighting techniques beyond the scope of this bulletin. It is important Whatever your colour preferences, you'll find them in Corian ®. Every Colour Imaginable. Imagine having an entire spectrum of colours to work with. The Corian ® colours are presented in a rational system, based on value and hue, and divided into sub-palettes to help you quickly find the right colour and texture. Choose from whites, neutrals Often the support structure is not provided by the fabricator, but it is the responsibility of the fabricator to ensure that proper structural support is provided before installing the horizontal Corian® Solid Surface. A. Types of Support Horizontal Corian® Solid Surface installations must be supported on a Cut the Solid-Surface Material. Set the blade depth about 1/8 inch deeper than the thickness of the solid-surface material, then plug in the saw and begin cutting. Feed speed should be very slow—considerably slower than you would use when cutting wood. Keep the saw steady and continuously moving ahead. Welcome to Corian ® Design: a leading global brand in advanced surfacing solutions for interior design and architecture. Some of our product offerings have availability that is specific to a regional location. To ensure that we are providing you the best service and product selection Created Date: 2/25/2015 5:09:52 PM Nearly every solid surface adhesive on the market will require an adhesive gun and mixing tips to properly mix and dispense the two-part adhesive to ensure the most effective bond. There are essentially two types of guns—a manual gun and a pneumatic gun. Manual solid surface adhesive dispensing guns vary in price and durability. The lower Corian® Fabrication Manual. download Report . Comments . Transcription . Corian® Fabrication Manual