Astral pool sand filter manual

Follow these indications for a correct assembly of the filter: 1.- Place the filter on a horizontal and clean surface. 2.- Place the filter in its final location. 3.- In case of a filter with a lateral valve, install the selector valve in the filter. Make sure that the joints between the valve and the filter are correctly placed. 4.- Our projects. "atlas"premuim sand filter astral pool d.600 (24") Fiber Laser for sale in Canada. 9 Pics about Fiber Laser for sale in Canada : Astralpool Millennium Blown sand filter Top 9,000 l / h with a diameter, MILLENNIUM filter 2 kg/cm2 | Basseiniekspert and also Stock No. 03578, CPF-20 Air filter, w/regulator, optional On Precision. ASTER filter. Beige laminated polyester and fibreglass body with boltless lid and polypropylene base. Equipped with pressure gauge, water drainage plug, and multiport valve. Maximum working pressure: 2,5 kg/cm2. Filtration velocity: 50 m3/h/m2. CHARACTERISTICS: - Sand filters, laminated with polyester/fibreglass resin. Comes in gray Ral 7038. 4 D=1600 to D=2350mm 500 OD C H OG1 NOZZLES 0,5 mm A B OK OK 3/4" OP 1200 OJ OG2 O400 150 ø internal diameter ø external diameter Recommend filtration velocity Inlet/outlet connections Total height Volume Service weight Net weight Recommend flow Surface filtration Backwash air inlet Air relief outlet Top manhole Lateral manhole Shightglass Recommended backwash velocity The advanced technology developed for the Cantabric filters offers extraordinary reliability in operation with low maintenance, allowing the filers to run safely with optimal pool filtering for many years. The equipment also includes the AstralPool 6+1 multiport valve with filter, backwash, rinse, recirculate, waste and closed positions. If using Zeolite or M3, regenerate filter sand. This is important in commercial applications as it aids in the removal of ammonias. If pressure is more than 30 - 40 kPa different from new filter, a sand change may be required Add salt to filter sand per supplier. Allow to sit for 24 hours then backwash, rinse and return to filter. Use only special pool-grade filter sand, free of all limestone or clay: #20 Silica sand 0.45-0.85mm, approximately one 9kg bag should suffice. If you do not use the recommended size of filter sand, filtering performance will be reduced and the sand filter may damaged, thereby voiding the warranty. NOTE: Download the brochure and manual here. AstralPool Cantabric Sand Filters requires less power consumption for optimal flow rates to keep the water crystal clear. Toggle navigation The filter(s) come standard with a 16" round manway opening and cover, flanged influent/effluent ports, manual air vent and media/water drain combination port. The filters are NSF listed for filtration rates from 5 to 20 gpm/ ft² of filter area with operating flows from 45 to 935 gpm in a single tank. Filter Sand is a #20 Silica Sand · D200 mm filter lid in injected plastic for models of diameter 500, 650, 800 and 950 mm, and D400 mm lid for models of diameter 1050 and 1200 mm, with AISI-316 stainless steel screws. · Gaskets in EPDM. · Equipped with pressure gauge in filter lid, manual water and air purge, and D200 mm sand discharge. · Filter base made of reinforced PP. Top Mount Sand Filters are supplied with a screw down Multiport Valve. Supplied with the Multiport Valve are Flange clamp, screws and O-ring. 1. Screw the barrel unions onto the threaded ports on the Multiport Valve. 2. When ro