Airturn pedpro manual

AirTurn bluetooth pedals app controllers midi daw tablet holder mount Enhance Your App Control Solutions to Mount and Control Your Bluetooth Device Hands Free! Getting Started Bluetooth Pedals AirTurn AirTurn DUO 500 $ 109.00 USD AirTurn AirTurn QUAD 500 $ 139.00 USD AirTurn AirTurn BT500S-2 Controller $ 89.00 USD AirTurn The AirTurn PEDpro controls your laptop or tablet via Bluetooth, so you can scroll lyrics, tabs, and more with a tap of your foot. Overview - Control your apps with the AirTurn PEDpro Bluetooth Foot Controller! Documents and Manuals + For support or warranty questions, please contact the manufacturer: Phone: 888-247-1223 Power on the AirTurn pedal by holding the power button for 2 seconds. 2. Briefly press the MODE button until the red LED turns off. Both LEDs should flash once. This indicates the AirTurn device is The AirTurn PEDpro is a low profile, silent, and portable foot switch for providing hands-free switching. Because there are few moving parts, there is very little to wear out. You simply connect to your Bluetooth and load your favorite AirTurn compatible app and you are ready to go. AirTurn's PED, PEDpro, BT200 and BT500 Series of devices feature six different modes for compatibility with a wide range of devices. Using the Mode 1 (AppDirect) will give you the best battery life and won't interfere with iOS's virtual on-screen keyboard. Ensure that "AirTurn Support" is enabled and select your device from the AirTurn Manager allows you to test your AirTurn's functionality, read manuals and FAQs for your AirTurn, change its configuration and update its software. Supports all AirTurn models with configuration for PED, PEDpro, DIGIT III, BT200 and BT200S. TEST YOUR AIRTURN: When you press a pedal/button on your AirTurn it will be highlighted on the image. See the Manual for your AirTurn device. Usually, you press and hold the mode button for 2 flashes of the red LED, release, and both LEDs will flash 2 times to confirm the MODE 2 setting. Run the AirTurn Manager app on your device and connect your controller. Configure MIDI messages for each pedal. Select "Pedal Actions" and "Mode 7". The AirTurn PEDpro is a non-tactile pedal that uses a light press to actuate. Works like the button on a microwave. Control your apps with your foot! Plug and play without the cable for 150 hours. The rechargeable battery keeps you going gig after gig. Silent, Durable, Reliable and User Customizable. An important tool for gigging musicians. Swipe to the AirTurn PED setup screen to configure an AirTurn PED or AirTurn PEDpro foot pedal. Choose Actions Here you can tap on the foot pedals in the screen to set the action in the Actions Menu. Choose Pedal Mode The AirTurn PED can operate in a number of modes. Use this method to choose the pedal based on it's current mode to configure. Two ways you can replace the battery in your AirTurn PED.More info HERE: bit.ly/2hVrrNh THE BT-106 TRANSCEIVER. Thank you for your purchase of an AirTurn BT-106 wireless controller. We hope you enjoy the wonderful convenience of both hand-held and hands-free page turning, effects management, media players, camera control and other creative ways to trigger events with the BT-106 family of products. THE BT-106 TRANSCEIVER. Thank you for your purchase of an AirTurn BT-106 wireless controller. We hope you enjoy the wonderful convenience of both hand-held and hands-free page turning, effects management, media players, camera control and other creative ways